Timber is one of the nicest things about a Melbourne home, whether it is a backyard deck in Fairfield, a verandah on an Edwardian house or the exposed beams of a mudbrick home in Eltham. Keeping it looking good comes down to choosing the right finish and keeping up with it.
Here is how the three main options compare.
Decking oil
Decking oil soaks into the timber rather than sitting on top. It feeds the wood, brings out the grain and helps repel water. Because it does not form a film, it will not peel. It just wears away gradually and needs topping up.
- Best for: decks, outdoor stairs, timber furniture and anything walked on
- Look: natural, low sheen, with the option of a tint
- Upkeep: most decks benefit from a recoat every year or two, more often in full sun
Read more about our deck oiling service.
Timber stain
A stain adds colour while still letting the grain show. Penetrating stains behave much like a tinted oil. Some exterior stains build a light film for extra protection. Stain is a good way to even out mismatched boards, refresh greyed timber or change the tone of a fence or pergola.
- Best for: fences, pergolas, screens, cladding, gates and verandah posts
- Look: anything from a light tint to a deep tone
- Upkeep: typically every few years, depending on sun and the product
See timber staining.
Varnish and clear coatings
Varnish forms a hard, clear film on the surface. It gives a richer, glossier look and strong protection, especially indoors. Outdoors, film finishes look great when fresh, but UV and timber movement can eventually crack them, and once a film starts to peel it needs sanding back before recoating.
- Best for: interior timber like beams, ceilings, doors, joinery and handrails, plus sheltered exterior timber
- Look: clear, from satin to gloss, with the grain on show
- Upkeep: long lasting indoors; outdoors, keep an eye on it and recoat before it fails
We do a lot of timber varnishing in Eltham and the surrounding bush suburbs, where homes are full of natural timber.
How to choose
- Is it walked on? Choose oil. It is easy to maintain and will not peel underfoot.
- Do you want to change or even out the colour? Choose a stain.
- Is it inside or well sheltered, and do you want a richer finish? Varnish is a good fit.
- Is the timber already grey and rough? It may need restoring first, with cleaning and sanding before any finish goes on.
Do not mix systems blindly. Oil will not soak into timber that still has varnish on it, and varnish will not stick over a fresh oil. If you are changing finishes, the old one needs to come off first.
Prep makes or breaks timber finishes
Whatever finish you choose, the timber needs to be clean, dry and sound. That usually means a wash, removing failing coatings, sanding where needed and fixing loose boards or popped nails. Our guide to surface preparation explains why this matters.
Not sure which finish suits your timber? We will look at it, tell you honestly what it needs and give you a written quote.




