It is one of the first things people ask us when we quote an exterior: how long will it last? The honest answer is that it depends on the surface, the paint, the prep and which way the wall faces. A well prepared, quality acrylic exterior on render or brick can look good for around eight to ten years. Timber trims, fascias and window frames usually need attention sooner, often somewhere between four and seven years.
Melbourne throws a bit of everything at a house. Hot, dry spells, sudden downpours, cold mornings and strong UV all work on paint at once. Here is what makes the biggest difference.
What wears exterior paint out faster
Sun on the north and west walls
UV breaks down paint binders and fades colour. On most Melbourne homes the north and west faces age noticeably faster than the rest. Dark colours absorb more heat, which can also make timber move more and crack the paint film. If you love a dark scheme, ask about paints made to hold their colour and reflect heat.
Moisture and shade
The opposite problem shows up on south facing walls and under big trees. Damp, shaded surfaces grow mould and mildew, and paint peels where moisture gets behind it. This is common on leafy streets in suburbs like Ivanhoe and Eltham.
Timber movement
Timber expands and contracts with the weather. Weatherboards, fascias and eaves and window frames flex far more than masonry, so the paint on them works harder and fails first, usually at joints and end grain.
Prep that was skipped last time
Most early paint failure we see is not the paint’s fault. Paint applied over chalky, dirty or flaking surfaces has nothing solid to hold on to. If the last painter skipped the wash, scrape and prime, you will see peeling within a couple of years no matter which brand was used.
Signs it is time to repaint
- A chalky residue comes off on your hand when you wipe the wall
- Paint is cracking, flaking or peeling, especially on timber
- Colour has faded unevenly between walls
- Bare timber is showing at joints, sills or the bottom edge of weatherboards
- Gaps have opened up around windows, doors and trims
- Mould keeps coming back on shaded walls
Catching it early matters. Repainting when the paint is tired but still sound is quicker and cheaper than waiting until timber is exposed and starting to rot.
How to make the next paint job last longer
Get the prep right. A proper exterior job starts with a wash down (we often use pressure washing), then scraping loose paint, sanding edges, filling cracks, replacing failed caulking and priming bare timber. Our guide to why surface preparation matters goes through it step by step.
Match the paint to the surface. Rendered walls need a breathable, flexible coating that bridges fine cracks. Painted brick needs good adhesion and a finish that lets moisture escape. Timber needs a primer and topcoat system made for timber.
Paint in the right conditions. Paint needs dry surfaces and mild temperatures to cure properly. We cover timing in the best time of year to paint an exterior in Melbourne.
Do small maintenance as you go. A gentle wash every year or two, and touching up timber trims before they fail, can add years to the whole job.
Thinking about an exterior repaint?
We look at the condition of every surface, tell you honestly what needs repairing, and give you a written, itemised quote. See our exterior painting service or ask for a free quote and we will come out and have a look.




